Asus TUF B760M-BTF WiFi D4: All connectors out of sight

Asus TUF B760M-BTF WiFi D4 in detail

Why put connectors from the front of the motherboard when they can be from the back? This is what Asus and other manufacturers are thinking with boards with, say, an inverted connector layout. The TUF B760M-BTF WiFi (D4) model has all connectors moved from front to back. This, with the current trend of glass side panels, mainly contributes to a nicer look. But we’ll also be interested in other, measurable things as part of our analysis.

Conclusion

In the case of the TUF B760M-BTF WiFi D4, you are dealing with a solid mATX motherboard with the added value of atypical connector placement on the back. In terms of compatibility with cases, this can be taken as a disadvantage, after all, you can’t install such a board everywhere. But if you can find a supported case that suits you, the TUF B760M-BTF WiFi D4 is attractive for builds that are also looking for the most attractive price/performance ratio. In this case, there are none of the markups that are common with non-traditional components. And you won’t overpay on a compatible case, where the Asus A21, for example, also features good affordability.

For those users who are bothered by the sight of cables on conventional motherboards, this is a good choice for the cheaper PC build segment. The TUF B760M-BTF WiFi D4 can handle CPUs at over 300W, but you’ll achieve more efficient operation with lower power models.

The VRM is robust enough even for the Core i9-14900K(F) without power limits. Even with a processor this powerful, critical spots will be below 100°C (and thus far from VRM throttling), even in a case with average airflow. Our heat maps do show a hundred degrees Celsius, but that’s a situation without the passive coolers and with them there, it won’t be as dramatic.

In our extensive compute and gaming tests, we didn’t see any anomalies or anything that the Asus BTF board couldn’t handle. Among the results, though, you’ll come across one where the B760M-BTF WiFi D4 ends up on the tail of the charts, but that’s with minimal speed losses, which can also be determined by the relatively slower memory, for example. It should be noted again that the tested variant of this motherboard supports DDR4 type memory. These are significantly cheaper compared to DDR5 memory, and if a lower speed is sometimes achieved, the differences in it definitely do not correspond to the differences in the amount of money that is saved with this motherboard (with DDR4 memory instead of the more expensive DDR5).

The M.2 slots aren’t out of the average in terms of speed either, where even the one on the back of the PCB performs as expected. The same goes for USB ports or ethernet connectivity – over 280 MB/s in both directions. Slightly below average are only the SSD coolers, which are quite small. For the VRM coolers, however, Asus has already used more material, which is also quite nicely sectioned longitudinally and transversely and thus has increased the total radiation area and thus the cooling efficiency.

Internal connectivity is quite extensive, three PCI Express slots and three M.2 slots for SSDs are definitely above standard on an mATX board in this price class. The rest is already mediocre, be it the four SATA slots or the single 19-pin for two USB ports on the front panel of the case.

We can recommend the TUF B760M-BTF WiFi D4, as a motherboard for a cheaper gaming setup to help make the computer look as visually pleasing as possible as well, with a clear conscience. And taking into account its uniqueness, we award it the “Smart buy!“. Lastly, and once more – you will not fit this motherboard into any case and compatibility is required to respond to the unconventional placement of the connectors at the back, or on the opposite side of the PCB to the normal.

English translation and edit by Jozef Dudáš


Niektoré z testovaných dosiek sú dostupné aj v e-shope Datacomp

Special thanks also go to Blackmagic Design (for a DaVinci Resolve Studio license) and Topaz Labs (for DeNoise AI, Gigapixel AI and Sharpen AI licenses)


  •  
  •  
  •  
Flattr this!

Asus TUF Gaming X870 Plus WiFi: USB4 for reasonable money

Motherboards with AMD X870 chipsets are already in stores. Unlike the older models designed for the AM5 platform, also compatible with Ryzen 9000 processors, X870 motherboards must support the USB4 interface, and there are more minor changes. We start our analysis of motherboards with the new AMD chipsets with the Asus model – the TUF Gaming X870 Plus WiFi. The mid-range also has a strong VRM. Read more “Asus TUF Gaming X870 Plus WiFi: USB4 for reasonable money” »

  •  
  •  
  •  

The fix for dying Intel CPUs is out for first motherboards

It looks like the most important thing to happen in the PC industry this year are the widespread issues of Intel Raptor Lake processors with instability and game crashes caused by gradual physical damage to the chips due to high voltages that leads to irreversible degradation. The microcode patches, which will hopefully stop the CPUs from dying – the CPUs for which it is not too late already that is – have finally started to appear. Read more “The fix for dying Intel CPUs is out for first motherboards” »

  •  
  •  
  •  

Asus ROG Strix Arion. One of the best equipped SSD enclosures

The accessories of Asus’ top-of-the-line SSD enclosure are beyond those of any other smartphone. Various cables, a rubber protector, a strap loop and within the built-in features, for example, an RGB LED. Excessive and annoying? Perhaps, but likely to appeal to the target audience of ROG products. The Strix Arion, among other things, leads the speed tests, and it does so at an exceptionally low power consumption. Read more “Asus ROG Strix Arion. One of the best equipped SSD enclosures” »

  •  
  •  
  •  

One comment Add comment

  1. One small note on supported cases. Asus BTF motherboards are also supported by Corsair’s now available 6500 and 2500 series cases. The 2500D Airflow, 2500X, and 2500X RGB models also fit nicely with the TUF B760M-BTF WiFi D4 in terms of form factor, as the combination of a mATX motherboard with a midi-tower case is mentioned.

Leave a Reply

Your email address will not be published. Required fields are marked *