Tests of alternative BeQuiet! mountings
This didn’t work out for BeQuiet!. The supplied mounting corners for specific uses don’t work as promised. Instead of increasing the static pressure as advertised, the corners on radiators even decrease the static pressure and thus the cooling performance. And even the case mountings, which are supposed to eliminate vibration, don’t make much sense on the Silent Wings (Pro) 4 design. The whole thing seems somehow… half-baked.
Results: Vibration, Z-axis
Why is there a missing value sometimes? There may be more reasons. Usually it is because the fan could not be adjusted to the target noise level. Some have a higher minimum speed (or the speed is low, but the motor is too noisy) or it is a slower fan that will not reach the higher decibels. But the results in the graphs are also missing if the rotor is brushing against the nylon filter mesh. In that case, we evaluate this combination as incompatible. And zero in the graphs is naturally also in situations where we measure 0.00. This is a common occurrence at extremely low speeds with obstructions or within vibration measurements.
- Contents
- Tests of alternative BeQuiet! mountings
- Results: Airflow through a thinner radiator
- Results: Airflow through a thicker radiator
- Results: Static pressure through a thinner radiator
- Results: Static pressure through a thicker radiator
- Results: Vibration, in total (3D vector length)
- Results: Vibration, X-axis
- Results: Vibration, Y-axis
- Results: Vibration, Z-axis
