Except for the matte black finish, the U12A chromax.black does not differ in any way from its original version. The basis of the cooler is still a large copper base with a nickel-plated surface, which is the only area of the cooler that is not black. Seven thick copper heatpipes emerge from the base and intersect a dense bundle of aluminum fins. The connection of the heatpipes and fins is soldered, which should ensure better heat transfer as well as long-term reliability of the connection.<\/p>\n The design of the cooler is asymmetrical, so there is no physical conflict with the DIMM slots for operating memory on motherboards with Intel LGA 115x\/1200\/1700 or AMD AM4\/AM5 sockets. Due to the thickness of the heatsink, the cooler is also equipped with a pair of high-end NF-A12x25 fans in chromax style. However, if you’ve been following my reviews for a while, then you can probably guess that I plan to test the necessity of a second fan. So in the results you will find two sets of tests, the first with the factory version of the cooler and the second without the rear fan.<\/p>\n The main advantage of the U12A chromax.black is its relatively compact dimensions with a total height of 158 mm, which should ensure compatibility with most common cases on the market. The cooler is sized as a replacement for large coolers with 140mm fans for builds where these large coolers usually do not fit. I even managed to personally install this cooler in my favorite SFF case Cooler Master NR200P, although according to the specifications this case only supports coolers up to 155 mm in height (admittedly, I had to remove the side frame for fans\/HDD, but that doesn’t matter too much).<\/p>\n In the cooler’s accessories, we find everything we have been used to from Noctua for years. Mounting kits for all current CPU sockets except TR4\/sTRX4 are complemented by a fan splitter and two adapters to reduce their maximum speed. In addition, you will find a tube of NT-H2 thermal paste in the package, which will last you for several applications and of course detailed instructions for installing the cooler. There is also a typical steel screwdriver and a metal sticker with the manufacturer’s logo.<\/p>\n The time-tested and user-friendly SecuFirm2 mounting system is now slightly modified to allow installation of the cooler on the LGA 1700 socket, which differs slightly from the LGA 115x\/1200 in the spacing of the mounting holes (75 \u00d7 75 mm versus 78 \u00d7 78 mm). Therefore, the supplied metal backplate no longer has the spikes fixed, but you choose their spacing when installing according to the socket. However, it is still a very simple and reliable mounting system. Installing the cooler is a matter of a few moments and you should not encounter any difficulties.<\/p>\n In the table below you can easily compare all current Noctua tower coolers using 120mm fans. You can see that the main differences are in the depth of the coolers and, unsurprisingly, the reduced height of the D12L.<\/p>\n![\"\"](\"https:\/\/www.hwcooling.net\/wp-content\/uploads\/2022\/11\/noctua-nh-u12a-chromax-black-01.jpg\")
<\/a><\/p>\n<\/a>\u00a0 \u00a0<\/a><\/p>\n<\/a>\u00a0 \u00a0<\/a><\/p>\n<\/a>\u00a0 \u00a0<\/a><\/p>\nCooler and fan parameters<\/h2>\n
<\/th> <\/th> <\/th> <\/th> <\/th> <\/th><\/tr><\/thead> Cooler <\/td> <\/td> NH-A12A chromax.black <\/td> NH-D12L <\/td> NH-D12L <\/td> NH-U12S redux <\/td><\/tr> Supported sockets <\/td> Supported sockets <\/td> Intel LGA 115x, 1200, 1700, 20xx; AMD AM4\/AM5 <\/td> <\/td> <\/td> <\/td><\/tr> Height <\/td> <\/td> 158 mm <\/td> 145 mm <\/td> 158 mm <\/td> <\/td><\/tr> Width <\/td> <\/td> 125 mm <\/td> <\/td> 125 mm <\/td> <\/td><\/tr> Depth with fan <\/td> <\/td> 112 mm <\/td> 113 mm <\/td> 71 mm <\/td> <\/td><\/tr> Weight <\/td> <\/td> 1220 g <\/td> 890 g <\/td> 755 g <\/td> 710 g <\/td><\/tr> Heatpipe <\/td> Heatpipes <\/td> 7\u00d7 (6 mm) <\/td> 5\u00d7 (6 mm) <\/td> <\/td> 4\u00d7 (6 mm) <\/td><\/tr> Maximum RAM height <\/td> <\/td> no restrictions <\/td> no restrictions <\/td> no restrictions <\/td> no restrictions <\/td><\/tr> MSRP <\/td> MSRP <\/td> \u20ac 120 <\/td> \u20ac 90 <\/td> \u20ac 70 <\/td> \u20ac 50 <\/td><\/tr><\/tbody><\/table><\/div>