Gelid IceCap vs. more than 40 other M.2 SSD coolers

The number of tested SSD coolers is piling up, and the inter-comparison of different models is already quite voluminous. It includes inefficient structures, simpler (but efficient) and more complex designs. The IceCap cooler, which is the subject of this analysis, is among the more reasonable solutions for a few euros. In short, an inexpensive option to consider when thinking about how to reduce SSD temperature. Read more “Gelid IceCap vs. more than 40 other M.2 SSD coolers” »

Akasa Gecko Pro: An SSD cooler with a “different” orientation

The successor to the SSD cooler, which didn’t have much competition in its price range. That’s one way to introduce the Gecko Pro, which is a bit more expensive, but also more refined (in terms of mounting as well). And it also has a distinctive feature that clearly distinguishes it from other coolers – the fins are not longitudinal (as is common), but in width. The price to cooling performance ratio is again excellent. Read more “Akasa Gecko Pro: An SSD cooler with a “different” orientation” »

Test: BeQuiet! MC1 compared to SSD coolers on motherboards

The coexistence of third-party SSD coolers that are sold separately with the ones you get in the price of the motherboard invites closer examination. Which of these solutions makes more sense and when? We’ll start answering that question starting now, beginning with an analysis of the BeQuiet MC1 cooler, which will be the first to be confronted with a whole host of motherboard SSD coolers. Read more “Test: BeQuiet! MC1 compared to SSD coolers on motherboards” »

It’s been two decades since the creation of BeQuiet!

Do you know what first carried the BeQuiet! logo? It wasn’t a cooler, it wasn’t a fan, it wasn’t a PSU, and it wasn’t a case. These components were added to the portfolio only later. BeQuiet! started on something completely different, relatively simpler. Over time, however, the range of components has grown considerably. Let’s take a look at what the company has been gradually getting up to. Read more “It’s been two decades since the creation of BeQuiet!” »

Water block on SSD? XM2 Hydro X started selling for $40

Corsair has been dealing with SSDs in recent days. In a short time sequence, it first announced and then released two extra-fast SSDs, of which the cheaper one with NAND QLC memory. These are not yet widely used among models with PCI Express 4.0 support. But the real curiosity is the third thing on the list – a water block with which you can order the more expensive SSD or buy it separately for your own one. Read more “Water block on SSD? XM2 Hydro X started selling for $40” »

RaidSonic has an SSD cooler with extreme 25-watt TDP

Icy Box IB-M2HSF-702, compared to competition, is specific in terms of size but also a fan. Users often have prejudice towards active cooling in non-traditional spots inside a PC case. Especially in cases where it is believed that it is possible to design at least as efficient a passive cooler or that a higher cooling performance is still not on point. This SSD cooler will not avoid doubtful looks either. Read more “RaidSonic has an SSD cooler with extreme 25-watt TDP” »

Akasa SSD heatsink: really cheap and efficient solution

Simple and optimally milled aluminum plate, sounds like a good basis for some SSD heatsink with the potential to achieve high efficiency at low cost. Fast, easy installation and great compatibility with graphics cards is also quite important, plus the look is not bad. Akasa probably wanted to create an ideal compromise of all the key elements. This could easily became a bestseller because the price is just 4 euros. Read more “Akasa SSD heatsink: really cheap and efficient solution” »

Adata XPG Storm: good looking but not efficient

16,500 rpm is extreme. A tiny fan in the unique SSD cooler by Adata can run at such a speed. We expected that it will be possible to regulate it and choose a reasonable setting, but there is no compromise in this design, and frankly, so many imperfections make it very difficult to see something positive about this product, which is a shame because the “core“ is pretty effective. Read more “Adata XPG Storm: good looking but not efficient” »

Fans that are even smaller and faster: 16 500 rpm for M.2 SSD

Efficient and quiet cooling in combination with small fans is usually just a utopic wish. But it looks like that they don’t give up easy. We just discussed Evga board with two 30mm fans which are supposed to cool the power supply circuit, and here appears another similar case – M.2 SSD active cooling. Read more “Fans that are even smaller and faster: 16 500 rpm for M.2 SSD” »

Small VRAM heatsink on a SSD NVMe? Cheap and efficient…

After the review of SSD coolers, we found some long-forgotten GPU memory heatsinks. Of course, we tested them right away and the results were excellent. It makes us wonder if (and when) is it worth to pay for commercial solutions, because a set of these small “hedgehogs“ costs up to five euros and one packing is usually enough for more uses. Read more “Small VRAM heatsink on a SSD NVMe? Cheap and efficient…” »

Duel of SSD coolers: Alphacool HDX M.2 vs. EKWB EK-M.2

With increasing IOPS, SSD cooling demands also increase. This applies even to powerful models (NVMe) for common customers. In most cases, controllers can take a lot, but high temperatures do not add to their performance nor lifespan and they can cause problems even in very quiet computers or in a room with higher air temperature. An additional heatsink can do wonders. Read more “Duel of SSD coolers: Alphacool HDX M.2 vs. EKWB EK-M.2” »