We tested the first Z790 motherboard primarily designed for use with the 14th generation Intel Core (Raptor Lake) processors. The chipset’s features haven’t changed, but there’s a lot of new, noteworthy stuff around it. That includes upgraded network connectivity headed by WiFi 7 and, finally, 5-gigabit Ethernet. And in the year that it’s been at it, Gigabyte has worked on a lot of details too. Some were more successful, others less so.
What it looks like in the BIOS
The user interface has undergone a pretty big makeover (relative to how slow these things usually progress and more or less stagnate). Gigabyte talks about a “UC BIOS” with upgraded “quick access” to key settings.
There are many EZ Mode options, and apparently more intuitive ones too, once you get used to the new layout of the individual buttons. Among them, there are already Gigabyte PerfDrive switches, i.e. different CPU management modes. In addition to the default settings, you can, for example, enforce 6 GHz on all cores (if the CPU and cooler can handle it) or disable E cores if needed. The button to enter the fan management interface is also more prominent (than it used to be). The information panel has stayed the same, although some items have been shifted around a bit, but you’ll find everything you are used to.
The advanced mode, which you enter by pressing the F2 key, traditionally consists of six tabs, where the first one (Favorites) can be used to set the memory profile or, for example, the LLC.
The window with the CPU preset profiles is also on the “Tweaker” tab, the very first option. Different profiles approach the CPU multiplier and power draw differently.
Also in this environment (Advanced Mode/Tweaker), you activate the memory profile beyond JEDEC for the bandwidth your modules are sold with. Then there are also advanced options such as memory controller bandwidth selection (Gear 4 means half bandwidth, Gear 2 means maximum bandwidth) or detailed timing settings. Only dabble in these things if you know what you’re doing, though. Otherwise, the result can be an unstable system.
To manage CPU power supply, you need to go to “Advanced CPU Settings” and unlock (enable) “Turbo Power Limits”. You can then set the power limits for both PL1 and PL2 by typing in the exact numeric values, and assign an arbitrary Tau timeout to them as well.
The management of CPU core clock speeds in reduced power draw modes can be quite strange, atypical. At least with the test CPU (Intel Core i9-13900K), it gives higher priority to the E cores, where higher clock speeds are also achieved compared to other boards. However, this is at the expense of the clock speeds of the P cores. These are, on the contrary, unusually low. This will be discussed in more detail in the evaluation in the final chapter. However, it is also worth noting that the BIOS version has no influence on this behaviour. With F4f, the behavior is the same as with all older versions. However, it cannot be ruled out that with a different processor, the “redistribution of forces” between the P/E cores will already be more reasonable with respect to the highest possible speed and efficiency.
For users whose application or game performance depends on ReSizable BAR, the “Settings” tab will be interesting, where it is possible to regulate this function (enable or disable). By default, ReBAR is disabled similar to Z690/B660 boards. The ReBAR toggle is, by the way, also included within EZ Mode, which is actually also one of the extensions of the new user (or graphical) interface.
And finally a little analysis of Smart Fan 6. Gigabyte’s fan management environment is second to none. There are up to six temperature sensors (including one for a custom probe), which is definitely above average compared to competing solutions.
You can create a progress curve for each of the eight connectors, and there is support for both PWM and DC control. This is already fairly common, but in turn the precision setting by entering the numerical values down into the table is super easy. This system is more convenient compared to dragging points directly on the graph.




















