Akasa Alucia SC12: Efficient shapes vs. soft material

Cooling, Extra tests, Fans | | Ľubomír Samák

Results: Frequency response of sound with a radiator

Few fans can wow us at first glance the way the Alucia SC12 from Akasa has done. Its build looks quite compelling in this price range. However, on a second look after detailed testing comes some sobering. But even though the high (even exorbitantly high) expectations have not been met, in some aspects the Alucia SC12 beats attractive, similarly cheap competitors in some situations.

Results: Frequency response of sound with a radiator

Measurements are performed in the TrueRTA application, which records sound in a range of 240 frequencies in the recorded range of 20–20,000 Hz. For the possibility of comparison across articles, we export the dominant frequency from the low (20–200 Hz), medium (201–2,000 Hz) and high (2,001–20,000 Hz) range to standard bar graphs.

However, for an even more detailed analysis of the sound expression, it is important to perceive the overall shape of the graph and the intensity of all frequencies/tones. If you don’t understand something in the graphs or tables below, you’ll find the answers to all your questions in this article. It explains how to read the measured data below correctly.

Noise levels in the tables below -85 dBu (but watch out for the negative sign, -70 dBu is louder than -80 dBu) can be ignored. They are in fact extremely weak and always far below the limit of human perception, and are often defined by the “noise” of the measurement string. Therefore, do not take even the dominant frequencies within the treble band that exceed 12 kHz too much into account.

Note: For these measurements a thinner radiator of 28 mm is used. Such thickness (and restrictiveness with FPI 22) is common in practice (also within AIO coolers).







Why is there a missing value sometimes? There may be more reasons. Usually it is because the fan could not be adjusted to the target noise level. Some have a higher minimum speed (or the speed is low, but the motor is too noisy) or it is a slower fan that will not reach the higher decibels. But the results in the graphs are also missing if the rotor is brushing against the nylon filter mesh. In that case, we evaluate this combination as incompatible. And zero in the graphs is naturally also in situations where we measure 0.00. This is a common occurrence at extremely low speeds with obstructions or within vibration measurements.


  •  
  •  
  •  
Continue:
Flattr this!

Related articles

Retrotest: 8× PC case. From small to “large”

Extra tests, PC cases | | Ľubomír Samák

In the archives we found some remarkable tests that have never been published in English. Although they are heavily out of date ( cases included have not been sold for a long time), it illustrates well the possible impact of cooling across a wide variety of designs. And by those we also mean completely passive solutions that use their own shell to dissipate heat, as well as rather larger midi-towers and also something in between. Read more “Retrotest: 8× PC case. From small to “large”” »

  •  
  •  
  •  

In vivo fan tests: 14 models in system positions

Cooling, Extra tests, Fans | | Ľubomír Samák

Here and there we come across the opinion that it is advisable to test fans in real life conditions, which we can easily refute. At the same time, we understand that a layman can best identify with the differences in component temperatures that arise precisely due to different fan airflows. To help you see the correlations of such tests with results from “unnatural” environments, here’s something we remembered. Read more “In vivo fan tests: 14 models in system positions” »

  •  
  •  
  •  

Akasa Gecko Pro: An SSD cooler with a “different” orientation

Cooling, Extra tests, SSD coolers | | Ľubomír Samák

The successor to the SSD cooler, which didn’t have much competition in its price range. That’s one way to introduce the Gecko Pro, which is a bit more expensive, but also more refined (in terms of mounting as well). And it also has a distinctive feature that clearly distinguishes it from other coolers – the fins are not longitudinal (as is common), but in width. The price to cooling performance ratio is again excellent. Read more “Akasa Gecko Pro: An SSD cooler with a “different” orientation” »

  •  
  •  
  •  

Leave a Reply

Your email address will not be published. Required fields are marked *