Testing methodology
You’ve already seen the new “CH” case model as part of a build where we played around a bit with cooling optimizations and keeping things as quiet as possible. Now here is the standard review with a more detailed analysis. Compared to the CH510 Digital series, the CH560 (WH) is a bit more expensive, but comes with more features. And significantly so. Its biggest selling point is its four efficient ARGB fans.
Testing methodology
The case is equipped with four fans directly from the factory. At the back, on the exhaust, there is a single 120mm FC120 fan, which, in terms of efficiency, is currently in the top third of 120mm fans in airflow through a hexagonal grille. With the same shape but a larger diameter, three 140mm DeepCool fans are fitted at the front, on the intake. Combined with the perforated lower part of the left side panel, it is assumed that the case will not be lacking anywhere in cooling.
Testing is done in a home environment where I strive for the most accurate results possible. In the room during testing, the air temperature in front of the case is 23 degrees Celsius and the minimum noise level I can measure with the Voltcraft SL-100 noise meter is 32.4 dBA. The sensor of the noise meter is aligned to the center of the top of the case at a distance of 10 cm, for the best measurement of the speed difference of the fans, which I change using the motherboard. For easy comparison to other cases, they are always regulated to fixed noise levels.
Individual components are heated for 10 minutes in FurMark synthetic stress tests and with Prime95 (custom settings) at the same time. This time is long enough to allow all components to warm up sufficiently. There are then 15-minute cooling breaks between tests, during which the component temperatures (and the case air temperature as well) are brought back to default.
Noise mode levels:
- 36 dBA
- 38 dBA
- 39 dBA
Test setup | |
Processor | AMD Ryzen 7 3700X |
Motherboard | ASRock X570 Taichi |
CPU cooler | Scythe Fuma rev. 2 (single fan) |
Thermal compound | Noctua NT-H2 |
Graphics card | Asus RTX 2060 Super Dual |
RAM | Patriot, 2× 8GB, 3600 MHz/CL17 |
SSD | Western Digital Blue 500GB (2280) |
Power supply | Corsair RM750X |
- Contents
- Exterior
- Interior
- Testing methodology
- CPU and GPU cooling tests
- Motherboard cooling tests
- SSD cooling tests and under-ceiling temperature
- Conclusion