The ROG Strix GeForce RTX 5070 Ti 16GB OC Edition targets enthusiasts of premium products. It impresses with its refined design, significantly oversized cooling, and ARGB lighting that stands out in a glass case. Extras include headers for system fans and a fifth display output. It offers a Q mode for quiet cooling fans and gives tuners ample headroom for boosting performance and and fine-tune acoustics. Read more “ROG Strix GeForce RTX 5070 Ti OC Ed. Review: Top of Asus’s Lineup”
Last time, we tested a pair of low-profile 140 mm fans on the TUF RTX 5070 Ti. They noticeably reduced noise, but they didn’t offer nearly as much cooling headroom as the stock fans, which can spin at over 3000 RPM. The top-tier Noctua NF-A14x25 G2 fans with the standard 25 mm thickness are much quieter than the originals at the same temperatures, and at full speed they also narrow the temperature gap significantly. Read more “TUF RTX 5070 Ti Deshroud: 2× 140 mm Noctua NF-A14x25 G2”
The TUF GeForce RTX 5070 Ti has a heatsink large enough to mount 140 mm fans. Swapping them is easy: remove a few screws and lift off the shroud with stock fans without breaking the warranty seal. We’ll use that to try a niche option—the low-profile 140 mm Arctic P14 Slim PWM PST. The card gets wider but keeps a reasonable height and, at similar temperatures, runs way quieter. Read more “Asus TUF RTX 5070 Ti Deshroud: Dual 140 mm Arctic P14 Slim Fans”
After testing the low-profile Noctua NF-A12x15 fans, we moved on to another appealing alternative for replacing the stock fans on the Asus TUF GeForce RTX 5070 Ti—a set of three Arctic P12 Slim fans, which you might already know from HWCooling tests. While they don’t outperform Asus’s original solution, which is tailor-made for the heatsink, they deliver slightly better results than the Noctua low-profile fans—and at a much lower price. Read more “Asus TUF RTX 5070 Ti Deshroud Using 3× Arctic P12 Slim Fans”
Graphics card manufacturers usually fit low-profile fans. If you ever need to replace them, there’s a wide range of 25 mm-thick models to choose from. In most cases, however, using them will make your card occupy four slots. The alternative is to stick with low-profile fans. We’ll test what happens when we swap Asus’s factory-installed 100 mm Axial-tech fans for three slimmer NF-A12x15 from Noctua—and also what happens if they don’t spin at all. Read more “Triple Noctua NF-A12x15 Deshroud for Asus TUF RTX 5070 Ti”
A few days ago, I tested how repasting affects the thermals and noise of Asus’s TUF GeForce RTX 5070 Ti. Today, we’ll take it a step further. We’ll take advantage of the fact that the card’s design allows easy removal of the shroud and and mount different fans directly onto the heatsink—in this case, a pair of Noctua’s classic NF-A12x25. We’ll measure how the noise profile changes while keeping temperatures under load the same. Read more “Asus TUF GeForce RTX 5070 Ti: 2× Noctua NF-A12x25 Deshroud”
We don’t typically disassemble graphics cards in our reviews—and for good reason. Once you take one apart, it’s hard to get it to behave exactly like it did in its original state, especially after replacing the factory thermal paste. With manufacturers who don’t skimp on thermal paste, repasting may not bring any improvement at all. In detailed measurements, we’ll look at how different paste and mounting pressure affect the card’s behavior. Read more “Asus TUF RTX 5070 Ti: A Closer Look at Thermal Paste Effects”
The GeForce RTX 5070 Ti targets Nvidia card buyers wanting more VRAM without jumping to the much pricier RTX 5080 or 5090. MSI’s Gaming series traditionally delivers premium features and excellent operating characteristics rivaling high-end models, but at a more competitive price. The GeForce RTX 5070 Ti 16G Gaming Trio OC Plus stands out among mid-range options with a cooler that runs quiet and has thermal headroom to spare. Read more “MSI GeForce RTX 5070 Ti Gaming Trio OC Plus Review: Picky-Grade”
Latest comments