Arctic BioniX P14 A-RGB: Elegant daisy chaining is just the beginning

High cooling efficiency is the foundation, but with the BioniX P14 A-RGB fans, Arctic has also made efforts on other fronts. In addition to the clever daisy-chaining method (with the aim of reducing cabling to a minimum), this includes, for example, illumination as intense as possible. The light is guided not only through the entire impeller, but also through the surface of the frame, from the side. There are light guides in these areas as well. Read more “Arctic BioniX P14 A-RGB: Elegant daisy chaining is just the beginning” »

Arctic BioniX P12 A-RGB: Efficient, inexpensive, illuminated and…

And with very clever daisy‑chaining from one fan to the next. This is what can fill in the ellipsis in the headline. The aerodynamic efficiency remains top‑tier, built on a design that Arctic revised some time ago (with the P12 Pro fans), but which can still be considered “new.” The BioniX P12 A‑RGB fans certainly are (new), and in this in‑depth analysis we focus on how they work. Read more “Arctic BioniX P12 A-RGB: Efficient, inexpensive, illuminated and…” »

Need new PC fans? Win a three-pack of Arctic P14 Pro A-RGB fans

A fan giveaway is finally here—and there are three of them up for grabs (a three-pack), with exceptionally attractive key characteristics. These are also illuminated variants, which may appeal to some users. Those who are less fond of RGB LED lighting can simply leave it disconnected and keep the fans in the dark. Well, relatively speaking, given that you are competing for the bright (white) version of the Arctic P14 Pro A-RGB fans. Read more “Need new PC fans? Win a three-pack of Arctic P14 Pro A-RGB fans” »

BioniX (P) now with seven blades, smarter daisy-chaining

Arctic’s new BioniX fans, which adopt a seven-blade geometry, just like the “base” P1x A-RGB models, are nearing release. Based on the results of the older BioniX “P” fans, it can be assumed that aerodynamic efficiency will be higher this time. Alongside the fans, Arctic is also preparing a fan hub to which they can be connected. The method of daisy-chaining one fan to the next is innovative as well. Read more “BioniX (P) now with seven blades, smarter daisy-chaining” »

Primarily quieter operation: Arctic P12 Pro (A-RGB) LN fans

Arctic has expanded its fan portfolio with new P12 Pro (A-RGB) models carrying the “LN” suffix in their designation. This stands for “low-noise” and in practice mainly means that maximum speeds are capped lower than on the original (P12 Pro/A-RGB) fans. However, the aerodynamic design itself remains unchanged, with the primary difference being the motor. At the same time, these are still affordable fans. Read more “Primarily quieter operation: Arctic P12 Pro (A-RGB) LN fans” »

The end, or just the beginning? 100 fans in HWCooling tests

Our database now includes one hundred fans—75 in the 120 mm format and 25 models with a physical size of 140 mm. In this article, we have compiled all data into unified charts. What was once separated for clarity is now brought together again, and the commentary will also include a… look ahead regarding fan testing. But we can already reveal that there is still a lot more to come. Read more “The end, or just the beginning? 100 fans in HWCooling tests” »

Arctic P12 Pro Reverse A-RGB: Looking good, working well!

The impeller is oriented so that, in the installed position, nothing visually obstructs the view. This refers to the stator struts, which can otherwise “spoil” the appearance. But this is not just about looks—it is about combining them with the efficient geometry of the proven five-blade design with a stabilizing ring (familiar from the P12 A-RGB). It is not exactly the same design, though, if only because what used to be behind the impeller is now in front of it. Read more “Arctic P12 Pro Reverse A-RGB: Looking good, working well!” »

Clean look prioritized: Arctic P1x Pro (A-RGB) Reverse

Arctic has been offering P12 Pro Reverse fans for some time now—models with blades shaped so that, when viewed head-on, no visually distracting elements are visible. At the same time, they are based on a proven aerodynamic design that delivers very strong airflow relative to noise levels. These fans are available in both 120 mm and 140 mm sizes, with and without lighting. Read more “Clean look prioritized: Arctic P1x Pro (A-RGB) Reverse” »

Prime GeForce RTX 5070 Deshroud With Arctic P12 Pro A-RGB

Asus cards such as the Prime GeForce RTX 5070 allow easy removal of the shroud with the fans, without removing the heatsink itself. This opens room for experimentation with cooling.We will find out how much you can gain by replacing stock fans with a pair of 120mm Arctic P12 Pro A-RGB fans. We will measure operating characteristics from 20 to 100% fan speed and see how much the card’s noise level drops at identical temperatures. Read more “Prime GeForce RTX 5070 Deshroud With Arctic P12 Pro A-RGB” »

Asus Prime GeForce RTX 5070 with 3× Arctic P9 PWM PST Deshroud

Alongside our previous tests of premium 92 mm Noctua fans, we’re adding something for value-focused users. For the more affordable Prime-series card, these are a better match. We’ll measure how much quieter the card gets after swapping the stock fans for budget 92 mm Arctic P9 PWM PST models with sleeve bearings, and compare the noise to the Arctic P9 PWM PST CO variant with dual ball bearings for continuous operation. Read more “Asus Prime GeForce RTX 5070 with 3× Arctic P9 PWM PST Deshroud” »

Lucky number seven? Arctic introduces MX-7 thermal paste

Thermal pastes from the legendary Arctic MX series are getting a new addition with an updated formulation: Arctic MX-7. Compared to its predecessor (MX-6), it is characterized by higher viscosity while simultaneously delivering higher cooling performance—at least according to internal tests published by Arctic. The new Arctic MX-7 thermal compound is available in three size variants, in tubes containing 2, 4, and 8 grams of material. Read more “Lucky number seven? Arctic introduces MX-7 thermal paste” »

Asus TUF RTX 5070 Ti Deshroud: Dual 140 mm Arctic P14 Slim Fans

The TUF GeForce RTX 5070 Ti has a heatsink large enough to mount 140 mm fans. Swapping them is easy: remove a few screws and lift off the shroud with stock fans without breaking the warranty seal. We’ll use that to try a niche option—the low-profile 140 mm Arctic P14 Slim PWM PST. The card gets wider but keeps a reasonable height and, at similar temperatures, runs way quieter. Read more “Asus TUF RTX 5070 Ti Deshroud: Dual 140 mm Arctic P14 Slim Fans” »

Asus Prime GeForce RTX 5070 Deshroud with Dual Arctic P12 Slim

The Asus Prime GeForce RTX 5070 from the new GeForce generation is aimed at the budget segment. If, like me, you come across a card with a noisy fan bearings, there’s a simple fix—replace it with a quieter one. On the Prime you can even do it without breaking the warranty seal. I swapped the original fans for two 120mm Arctic P12 Slim to see how much the noise has been reduced and what happens to the card’s temperatures and behavior. Read more “Asus Prime GeForce RTX 5070 Deshroud with Dual Arctic P12 Slim” »

Asus TUF RTX 5070 Ti Deshroud Using 3× Arctic P12 Slim Fans

After testing the low-profile Noctua NF-A12x15 fans, we moved on to another appealing alternative for replacing the stock fans on the Asus TUF GeForce RTX 5070 Ti—a set of three Arctic P12 Slim fans, which you might already know from HWCooling tests. While they don’t outperform Asus’s original solution, which is tailor-made for the heatsink, they deliver slightly better results than the Noctua low-profile fans—and at a much lower price. Read more “Asus TUF RTX 5070 Ti Deshroud Using 3× Arctic P12 Slim Fans” »

Arctic is releasing its first modern PC cases—the Xtender series

Arctic is entering the PC case market with a concept that, for example, can feature two exhaust fans at the rear for system cooling. And that’s not the only unconventional element—there are several. We break them all down in detail in this report. The amount of specifications and details available for the Xtender is fairly substantial, so let’s go through them one by one. Included, by the way, are Arctic’s efficient P14 Pro A-RGB and P12 Pro A-RGB fans. Read more “Arctic is releasing its first modern PC cases—the Xtender series” »

1 2 3 5