At last, we have the test results for the Fractal Design North XL case. The first article with construction details is now complemented by this second part, which brings a wealth of measurements that form the basis for a comprehensive evaluation. With this, the North XL case is now properly qualified for future comparisons with competing models. Fractal Design has certainly set the bar rather high.
Results: HDD noise level
Note: “Cage 1” refers to the position closer to the intake fans, while “Cage 2” is farther away. It’s helpful to keep this in mind to better understand the graphs with the measured results.







Thank you for the review(s) of this Fractal Design case: part one and part two.
May I suggest that more pictures are taken when grills and filters are removed to see what obstructions, if any, exists?
In the Meshify 3 article, you’ll hopefully already find at least some photo details similar to the ones you’re suggesting. 🙂
Thanks!
The HDD noise results, which were missing from the article immediately after publication, have now been added. For now, without comparisons, these measurements are hard to evaluate – but once more cases are added…
Would say HDD noise is good addition, but probably should be noted.
Whats drives are used and how much, because 5400 and 7200 is already different.
But if you pick 7200 8TB, and 7200 20TB, there is difference in sound. IDLIng may be similar, but startup or quick surface run will change sound profile for sure.
Thanks for the message. The HDD we used is a WD Gold HDD (WD4004FRYZ) – you can find this info in the second chapter of the article, Testing Methodology. We chose it based on experience from other tests where we monitored the impact of vibration on overall system noise. WD Gold drives are known to be very loud, but also high-performance. In our case tests, we measure noise levels during seek operations while performing random 512-bit read/write block access.