Asus TUF Gaming TF120: Cheap, lighted and efficient fan

Results: Static pressure through a nylon filter

Asus’s efforts in the field of standalone PC fans are on the rise. After the premiere in the form of the ROG XF120, there is now the half-price TUF TF120, which also gives more attractive results in some applications. And that’s even compared to other, similar fans with ARGB LEDs. The geometry of the TF120 is quite sensible, which is why it often beats its competitors in its price range.

Results: Static pressure through a nylon filter








Why is there a missing value sometimes? There may be more reasons. Usually it is because the fan could not be adjusted to the target noise level. Some have a higher minimum speed (or the speed is low, but the motor is too noisy) or it is a slower fan that will not reach the higher decibels. But the results in the graphs are also missing if the rotor is brushing against the nylon filter mesh. In that case, we evaluate this combination as incompatible. And zero in the graphs is naturally also in situations where we measure 0.00. This is a common occurrence at extremely low speeds with obstructions or within vibration measurements.


  •  
  •  
  •  
Flattr this!

Not just the basics: Asus ROG Strix B850-F Gaming WiFi

A relatively pricier B850 motherboard. But one that outperforms both equally priced and X870(E) motherboards in several ways. It does so with features that are not directly related to the chipset used, but those are often what matters. The ROG Strix B850-F Gaming WiFi motherboard may thus end up being exactly what you’re looking for in a powerful and timeless setup. This can include, for example, two M.2 slots with PCIe 5.0 support. Read more “Not just the basics: Asus ROG Strix B850-F Gaming WiFi” »

  •  
  •  
  •  

Tweaking Asus ROG Astral RTX 5080: Cut the Noise and Power Draw

Last week, we took a look at the Asus ROG Astral GeForce RTX 5080 OC Edition. It has a powerful cooler, but by default, the fan control pushes speeds high, and card is anything but quiet. So, I also measured how the card’s behavior changes when lowering fan speeds, how different power limit settings affect performance, and what the OC scanner does to the clock speed/voltage curve and how that impacts performance. Read more “Tweaking Asus ROG Astral RTX 5080: Cut the Noise and Power Draw” »

  •  
  •  
  •  

Some GeForce RTX 5090 fight melty connectors with thermal pads

Since GeForce RTX 4000, Nvidia graphics cards (fortunately just the highest models) have been facing issues with overheating and melting 12+4-pin power connectors. Newer models use the 12V-2×6 connector, which is designed to avoid improper attaching, and we recently discussed additional measures from Zotac. It seems that some of the freshly released graphics cards use another protective measure, addressing the root thermal issue. Read more “Some GeForce RTX 5090 fight melty connectors with thermal pads” »

  •  
  •  
  •  

Leave a Reply

Your email address will not be published. Required fields are marked *