With the i/A32 cooler series, Arctic made a really good impression and created a decent opponent for the excellent Fera 3. In the meantime, Swiss have strengthened their ranks and advanced to battle with Freezer 33. However, the expected drama with fight for every detail did not happen. Because of a design mistake of one of the players, the winner is quite dominant under standard circumstances. Read more “Arctic Freezer 33 face-to-face with SilentiumPC Fera 3 v2”
Coollaboratory is well known among the hardware enthusiasts, mainly thanks to its liquid metals. The model with higher thermal conductivity, Liquid Ultra, is commonly preferred with high power consumption chips since their default compounds are usually of lower quality. To find out whether CLU still pays off, we put it to the ring with an opponent from the Thermal Grizzly workshop, and with Core i5-7600K as the referee. Read more “Coollaboratory Liquid Ultra vs. Thermal Grizzly Conductonaut”
Do you know how many fans do you need and what speed they should run at to achieve the optimal cooling of your PC case? Is it better to induce positive pressure, negative pressure, or balanced airflow? Are four fans with less RPM more effective than two with more RPM? We can answer all these questions by providing you results of more than 70 tests which also include the monitoring of the heating of power supply circuit of CPU and GPU. Read more “System cooling in the spotlight. What to increase/decrease?”
Is it enough to replace the default paste, or should you consider an uncompromising solution like a liquid metal? Does it pay off to try your luck and experiment with on-die cooling? You will find the results of tests of all relevant combinations in this article. We also monitored how can the behaviour of a liquid cooler and a traditional air cooler affect the performance. Read more “Operation Kaby Lake: 24 ways to cool the chip”
The second round will be especially interesting for people who want to find the best solution for a standard use. The winner is a big surprise. Gelid, Noctua, Phobya, Reeven, SilentiumPC, Thermal Grizzly or Zalman? We can give away that it is not an expected favourite this time. We enjoyed a nice competition in the middle category, where it takes a lot to keep making a difference. We also tested OEM paste from Scythe as a bonus. Read more “Test of 27 thermal compounds, part 2”
Along with low power consumption chips, silent computers are also expanding. The British company Akasa has been specializing in the development of cases optimal for this purpose for the last few years. We have put their most progressive model through editorial hell. After exploring every corner and measuring temperatures in all possible positions, we can say what it can and cannot do. To give you a better idea, we are providing thermal vision too. Read more “Passive case Akasa Euler MX: 70 W of heat? Go ahead…”
Thermal pastes can significantly affect the cooling performance, so we have compared several models that represent the current offer. Is the legendary Arctic MX-2 still a good choice? Or is it more reasonable to try newer Cooler Master and Cryorig? There is also a copper Coollaboratory to consider. Well, we have prepared some recommendations, but few warnings too because there are several products that you should rather avoid. Read more “Test of 27 thermal compounds, part 1”
A drop in the middle, a cross, spread it with finger, or use an old credit card to smooth it perfectly? Even simple things like applying a thermal paste under your cooler can be a bit tricky sometimes. Commonly used methods are seemingly different, and if you also consider batching, there comes a question of how to it to achieve the best results. Read more “Spreading a thermal paste: how and how much?”
Latest comments