A few weeks ago, I tested the classic black version of the Asus Prime GeForce RTX 5070. It stood out for its combination of very good thermals and acoustics and an attractive price. However, one of the fans was lower quality, making the card noisier than it should have been. I decided to retest it with the white version. The good news is that the fan issue didn’t recur. As for overall noise levels, though, there’s still not much improvement.
Clocks, Temperatures & Fan Speeds—F1 24, 3840 × 2160 (P mode)
The following graphs show monitoring data from the F1 24 benchmark at 3840 × 2160 resolution with Ultra settings. The test takes place on the Singapore circuit in wet conditions. Unlike other benchmarks, which involve several loops with brief cooling intervals during loading, this is a continuous game load over a five-lap race lasting over ten minutes. The recorded values in the graphs are from the final lap, when the card is fully warmed up.
Average frame rate dropped by 0.3 fps compared to Quiet mode—but that’s within the margin of measurement error.
The average GPU clock ranged from 2730 MHz minimum to 2775 MHz maximum, averaging 2735 MHz.
Power consumption remained consistently at the limit, and the line was smoother than in the black variant’s test.
Maximum average GPU temperature reached 68.8 °C, and memory stayed mostly at 66 °C.
But the fans spun up even higher—up to 2080 RPM. At that level, the card becomes quite audible.
Throughout the test, monitoring showed GPU Boost being limited by the voltage cap.
⠀












