Why put connectors from the front of the motherboard when they can be from the back? This is what Asus and other manufacturers are thinking with boards with, say, an inverted connector layout. The TUF B760M-BTF WiFi (D4) model has all connectors moved from front to back. This, with the current trend of glass side panels, mainly contributes to a nicer look. But we’ll also be interested in other, measurable things as part of our analysis.
Adobe Photoshop (PugetBench)
Test environment: set of PugetBench tests. App version of Adobe Photoshop is 22.4.2.
Affinity Photo (benchmark)
Test environment: built-in benchmark.
Topaz Labs AI apps
Topaz DeNoise AI, Gigapixel AI and Sharpen AI. These single-purpose applications are used for restoration of low-quality photos. Whether it is high noise (caused by higher ISO), raster level (typically after cropping) or when something needs extra focus. The AI performance is always used.

Test environment: As part of batch editing, 42 photos with a lower resolution of 1920 × 1280 px are processed, with the settings from the images above. DeNoise AI is in version 3.1.2, Gigapixel in 5.5.2 and Sharpen AI in 3.1.2.









One small note on supported cases. Asus BTF motherboards are also supported by Corsair’s now available 6500 and 2500 series cases. The 2500D Airflow, 2500X, and 2500X RGB models also fit nicely with the TUF B760M-BTF WiFi D4 in terms of form factor, as the combination of a mATX motherboard with a midi-tower case is mentioned.
I’ve been following the “hidden connector” trend for a bit, but this deep dive into the TUF B760M-BTF really highlights some functional pros I hadn’t considered. It’s not just about the “fish tank” aesthetic with the glass panels. The article mentions how moving the CPU power connectors to the back actually allows for larger VRM heatsinks because they can encroach into space that usually has to stay clear for plugs.
Coming from a background of messing with older Dell PowerEdge servers https://serverorbit.com/power-supplies/server-power/poweredge, I’m used to those highly optimized layouts where every millimeter of airflow matters and cables are tucked into specific channels. Seeing consumer boards adopt this “backside” approach feels like a nod to enterprise-level cable management, even if the primary goal here is style. In my experience with high-wattage server PSUs, cable routing is usually very rigid, so I’m curious how this translates to home builds. You’re bending those thick 24-pin cables in a much tighter space behind the tray now.
Do you think we’ll start seeing PSU manufacturers releasing specific “short-head” or ultra-flexible cable kits for these BTF boards, or will standard modular cables be enough to clear the back side panels?
Thank you for the very thoughtful idea. As for your question: personally, I don’t know and wouldn’t want to speculate whether motherboard designs with rear connectors will prompt PSU manufacturers to respond with shorter connectors or similar adjustments.
We don’t have any information in this area, and as always, time will show what actually makes it to end users. That said, your idea definitely makes sense—now it just needs someone in a position to act on it and actually produce such cables. 🙂