The TUF GeForce RTX 5070 Ti has a heatsink large enough to mount 140 mm fans. Swapping them is easy: remove a few screws and lift off the shroud with stock fans without breaking the warranty seal. We’ll use that to try a niche option—the low-profile 140 mm Arctic P14 Slim PWM PST. The card gets wider but keeps a reasonable height and, at similar temperatures, runs way quieter.
Deshroud with 2× Arctic P14 Slim PWM PST, detailed results
The following charts show detailed measurements. Each setting includes four runs, with averages taken from the highlighted segment. As you move across the interactive chart, it displays the values measured for that fan-speed range.
If the interactive charts don’t work, there are click-to-expand images for each setting below. These cover steps from 25% to 100% fan speed in 5% increments; the set value is also shown in the image filename.
Below are the individual loops in detail, with fan speed from 20% to 100% in 5% steps.
⠀









































































































