Author: Ľubomír Samák

Everything that was achieved this year. Thank you! :)

News | | Ľubomír Samák

This year was exceptionally rich in terms of the activity we managed to generate. In various directions—whether on the magazine side or beyond it, reaching into school classrooms. The goal is to help create value in this field as well (in schools). At the same time, it is always extremely important what we are able to accomplish within our journalistic work itself. And there were quite a few milestones that were surpassed here, too. Read more “Everything that was achieved this year. Thank you! :)” »

PC fans in 2025. The biggest surprise?

Cooling, Fans, News | | Ľubomír Samák

The release of several attractive fans is associated with the year 2025. In this article, we will briefly focus on those that we tested this year and that deserve increased attention. In the end, however, we selected one “best” model—more precisely, the one that we consider the biggest positive surprise. And ultimately, the decision for such a fan is relatively straightforward. Read more “PC fans in 2025. The biggest surprise?” »

Brown and beige filament is in the testlab. What should we print?

News | | Ľubomír Samák

In the test lab we have filament, specifically Prusament in Noctua color shades, from which we can print something. Something that could also be useful to you, our readers. However, we need a 3D model of the printed object. If you provide it, there is a chance that we will use it for illustrative purposes (to show how this material prints), you will see the result in an article, and we will also send it to you for further use. Read more “Brown and beige filament is in the testlab. What should we print?” »

Shooting straight for the top: Asus announces the ProArt PF120 fan

Cooling, Fans, News | | Ľubomír Samák

It appears that Asus is taking fans seriously. The specifications and design elements of the new ProArt PF120 model look “dangerous”—that is, they suggest that cooling efficiency could be genuinely very high. Not only in terms of maximum speed (accompanied by higher noise), but also at noise-normalized levels comparable across products. This is hinted at by efficient geometry, LCP blades, a 28 mm thick profile, and many other factors. Read more “Shooting straight for the top: Asus announces the ProArt PF120 fan” »

Lucky number seven? Arctic introduces MX-7 thermal paste

Cooling, News, TIMs | | Ľubomír Samák

Thermal pastes from the legendary Arctic MX series are getting a new addition with an updated formulation: Arctic MX-7. Compared to its predecessor (MX-6), it is characterized by higher viscosity while simultaneously delivering higher cooling performance—at least according to internal tests published by Arctic. The new Arctic MX-7 thermal compound is available in three size variants, in tubes containing 2, 4, and 8 grams of material. Read more “Lucky number seven? Arctic introduces MX-7 thermal paste” »

Fractal Design Adjust Pro: Modern hub with USB-C

Analysis | | Ľubomír Samák

Fractal Design offers a USB-C hub that can be used to connect fans featuring this not-so-typical connector. Yes, the fans support this interface. The hub otherwise provides everything you would expect—fan speed control as well as selection of lighting colors (or lighting effects). Communication with the motherboard works in several ways. In this article, we’ll take a look at the details of the Adjust Pro. Read more “Fractal Design Adjust Pro: Modern hub with USB-C” »

Prusament PLA: you can make “Noctua” 3D accessories at home

News | | Ľubomír Samák

And here it is! Consumable material in Noctua shades. The Austrians teamed up with Prusa Research and, after some preparation, are bringing a 3D-printing filament to market. Once you model whatever you need, the result can be printed in brown or beige—exactly in the colors that match what has so far been “unmatchable”. Naturally, it doesn’t have to be just cooling-related items; the outcome can be anything. Read more “Prusament PLA: you can make “Noctua” 3D accessories at home” »

Noctua NF-S12A PWM: Example of unfortunate design

Cooling, Extra tests, Fans | | Ľubomír Samák

They never were as brilliant and amazing as marketing materials depicted (and still depict) them. Fans that are supposed to be top-tier for system positions are, at best, average. Well, judge for yourselves. We wouldn’t subscribe to the notion that these are currently aerodynamically attractive fans for PC cases. For the reason that they are not. And we can go straight to the specific reasons and arguments. Read more “Noctua NF-S12A PWM: Example of unfortunate design” »

Beware: 1 A fan headers can be too weak

Analysis, Fans, News | | Ľubomír Samák

Multiple fans connected to a single header may exceed the capabilities of your motherboard (or potentially a fan hub). This is due to a higher current draw than the maximum rating. We’ll analyze when and under what circumstances you should be cautious in this article. The threat of permanent device damage is quite real, but it’s fairly simple to safely prevent it. So, let’s take a look at it. Read more “Beware: 1 A fan headers can be too weak” »

Extra room from Fractal Design: Epoch XL cases released

News, PC cases | | Ľubomír Samák

You wanted it, so here you have it. The Fractal Design lineup now includes the Epoch case also in an “XL” variant. Efficient Momentum fans (RGB) in 140 mm are here, and now with the Epoch XL case, support for E-ATX motherboards and overall larger components is added. The graphics card can be even longer, and a tower cooler can be even taller. There’s also more room for cable management along with several other expanded possibilities. Read more “Extra room from Fractal Design: Epoch XL cases released” »

Thermaltake Toughfan 12 Pro: „Lower details“ are enough

Cooling, Extra tests, Fans | | Ľubomír Samák

A prime example of brute force. By that, we primarily mean the aerodynamically efficient geometry and the rigid impeller construction (from LCP). Thermaltake doesn’t rely on micro-optimizations, and yet the Toughfan 12 Pro achieves exceptionally attractive results. Especially when its low price is considered. Of course, several potentially undesirable cost savings stem from that price, and qualitative aspects are lower in some points. Read more “Thermaltake Toughfan 12 Pro: „Lower details“ are enough” »

Sapphire Nitro+ B850A WiFi7 motherboard details

Motherboards, Preview | | Ľubomír Samák

Sapphire and motherboards? It’s a thing now. We’ve focused on analyzing a model for the AMD platform—the Nitro+ B850A WiFi7. Just as with graphics cards, “Nitro+” signifies richer features and more premium design, though it still positions itself more in the mid-range. The use of the B850 chipset (AMD B850) also points to this tier, though its capabilities are more than sufficient, even exceeding the needs of many users. Read more “Sapphire Nitro+ B850A WiFi7 motherboard details” »

Endorfy Vero L6 PSUs: ATX 3.1 also in cheaper, lower end

News, PSUs | | Ľubomír Samák

Although even the Supremo series PSUs were not expensive, it is the new Vero (L6) series that truly fulfills the Endorfy philosophy of affordability. These PSUs also feature the 16-pin 12V-2×6 connector and support the latest power standard (ATX 3.1), while being relatively inexpensive. This is partly due to a relatively lower efficiency, fixed cabling, and a simpler fan—but that’s the point. Overall, these PSUs look promising. Read more “Endorfy Vero L6 PSUs: ATX 3.1 also in cheaper, lower end” »

Asus Prime MR120 ARGB: Lighting and airflow go well together

Cooling, Extra tests, Fans | | Ľubomír Samák

An affordable fan with lighting that still performs quite well. That sums up the Prime MR120 with ARGB LED. If you prefer lighting elements that highlight the fan’s frame rather than the impeller, this could also be an option—provided the aerodynamic properties of the Asus fan suit you. It must be reiterated that we are in a lower price tier, and the results correspond to that. Read more “Asus Prime MR120 ARGB: Lighting and airflow go well together” »

Sudokoo Mach120: Maximum (cooling) efficiency

Cooling, Extra tests, Fans | | Ľubomír Samák

Results-wise, it’s an absolute top performer. This holds true even in combination with various obstacles. In other words, the competing Phanteks T30-120 often ends up merely as the “next in line.” And the Mach120 has aesthetic advantages over it as well. The operation of the Sudokoo (Mach120) fan is also characterized by lower vibrations. You also get high maximum airflow along with reliable operation even at low speeds. Read more “Sudokoo Mach120: Maximum (cooling) efficiency” »

1 … 4 5 6 7 8 … 50