Asus Prime AP201: The emmental among computer cases

Cheaper, yet decent cases are not completely gone from the market yet. One such case is the Prime AP201 from Asus’ lower-end. Considering the price well under 100 EUR, you get a case with a above-standard build quality, which is characterized by the “infinite” perforation. Cool air is thus available to components theoretically from all sides. But this also means that it doesn’t damp noise too much. The question is what weighs more in the bigger picture. Read more “Asus Prime AP201: The emmental among computer cases” »

Proper wind now in DeepCool PC cases (CH560)

DeepCool addresses the biggest weakness of the older CH series cases – weaker cooling – in a rather selective way. Namely by preinstalling four fans (instead of one). This is no emergency solution, and the models used are based on a design that dominates the ARGB LED fan rankings in terms of efficiency. The new CH560 cases should thus feature impressive cooling performance in addition to a spectacular look. Read more “Proper wind now in DeepCool PC cases (CH560)” »

More heat, more cooling. The Enthoo Pro 2 server edition is out

Phanteks returned to its Enthoo Pro 2 case and tweaked a few things within the internal layout that will appeal especially to the server clientele. Key among them is support for larger motherboards with multiple PCIe slots, while still keeping the same case volume. Because of the assumption of high power draw of such a build, the cooling options are also more intensive, and for greater reliability there is again the possibility of installing server grade PSUs. Read more “More heat, more cooling. The Enthoo Pro 2 server edition is out” »

Enermax StarryKnight SK30: Not only impressive looks

Enermax’s latest case strikes a fairly good balance between visual and functional features. The more intense ARGB LED lighting is complemented by as many as four fans. Combined with a decently perforated front panel, the airflow is “taken care of”. On the other hand, there are a few things to complain about in this price range. What is attractive and what is not about the StarryKnight SK30 midi-tower? Read more “Enermax StarryKnight SK30: Not only impressive looks” »

New case (BeQuiet! Dark Base Pro 901), new fans

With the Dark Base Pro 901, BeQuiet! has raised the bar not only within their cases, but perhaps overall. For the first time ever, the Silent Wings 4 appear in system fan positions. In addition to the robust build, this full tower also has a touch panel for fan and lighting management. Compared to its predecessor, there is also a significantly changed side panel. The door, while significantly changed, has remained on the case. Read more “New case (BeQuiet! Dark Base Pro 901), new fans” »

Fractal Design Terra: 10 litres for high-end GPUs as well

Well, here we have something from Fractal Design to test again, something that goes beyond the usual formulas. The Terra case falls into the SFF (small form factor) category, but unlike many similarly sized solutions, there is room for a large graphics card. This makes the Terra an attractive small case for a gaming PC or a workstation reliant on the power of the GPU. But all this is traditionally discussed in more detail. Read more “Fractal Design Terra: 10 litres for high-end GPUs as well” »

A bit bigger (XL) midi-tower… Endorfy Arx 700 Air test

The all-new Arx case range has just made its debut. The first model, the 700 Air, is also the largest case from Endorfy. This case is equipped with up to five 140mm fans, which in combination with the ventilated front panel create a great potential for really powerful or very efficient (i.e. at lower rpm per unit of airflow also super quiet) system cooling. This then naturally has a positive effect on the results. Read more “A bit bigger (XL) midi-tower… Endorfy Arx 700 Air test” »

Regnum 400 ARGB – The most equipped Endorfy case in test

Through gradual evolution and refinement, Endorfy (formerly SilentiumPC) Regnum cases have progressed from the low end to the other side of the spectrum, to the peak. The “400” model with RGB lighting already costs over a hundred euros, but you don’t just pay for attractive visuals. There are up to four fans, three of which are behind a well ventilated mask. But we also came across things that can still be improved. Read more “Regnum 400 ARGB – The most equipped Endorfy case in test” »

DeepCool comes with cheap “ARGB” cases for smaller PCs

It’s remarkable what DeepCool has managed to get into the new CC360 (WH) ARGB cases, which have a retail price of just 55 EUR. It comes with three lighted fans and you also have the option of installing a powerful cooler (including a 360mm liquid cooler). The only thing that won’t fit are ATX motherboards. Support is up to MicroATX format, and DeepCool is thus looking to expand the lower tower case segment, in which there is relatively little choice. Read more “DeepCool comes with cheap “ARGB” cases for smaller PCs” »

DeepCool CH510 Mesh Digital: Temperatures right under your nose

If you like to monitor the temperatures of your components, we have a tip for you to take your temperature monitoring to the next level. The new CH510 Mesh Digital has a small display on its front to show the current temperature of select hardware. But just monitoring isn’t enough, you also need to take action to lower the temperatures, and in that the case itself falls a little short. Just one pre-installed fan may not be enough. Read more “DeepCool CH510 Mesh Digital: Temperatures right under your nose” »

Genesis Irid 505F: On to cooling with five fans

Among new cases, the Polish company Genesis is also making a statement by upgrading the older Irid 503 and Irid 505 cases. One of these new models, which we will now focus on in our tests, is the Irid 505F. This one is remarkable in that it comes with as much as five fans, which is quite unusual. Especially in the class of cheaper cases to which the Irid 505F belongs. Read more “Genesis Irid 505F: On to cooling with five fans” »

DeepCool released a 4-chamber case with ventilation flaps

For users who find conventional designs dull, cases such as the Quadstellar Infinity are emerging. In addition to the unconventional appearance inspired by space bodies, there are a number of noteworthy features that have an impact on cooling. The interior is divided into four segments for which the airflow can be individually controlled. And the installation of components is also different than in “conventional” cases. Read more “DeepCool released a 4-chamber case with ventilation flaps” »

Fractal Design North Mesh: Case like a piece of furniture

North: a case that is designed to be closer to the modern home. In some places, Fractal Design has replaced plastic and metal with wood and faux leather. The tested variant of the North case, with the additional Mesh designation, not only has a perforated front, but also the side panel, which makes new cooling options available. In addition to the factory configuration, we will also test the case with fans in non-traditional positions. Read more “Fractal Design North Mesh: Case like a piece of furniture” »

Evolveo M5: A PC case for the undemanding user (test)

Lower price usually goes hand in hand with lower quality materials or overall poorer build quality. This also applies to the tested Evolveo M5. With this case, you will come across a few places where the manufacturer has clearly skimped, but as long as you define yourself as a lower-end user, you’ll most likely be fine. The main advantage here may be the attractive price that probably won’t break the bank for you. Read more “Evolveo M5: A PC case for the undemanding user (test)” »

Perforated front and a display, the new DeepCool case

DeepCool has modified the original design of the CH510 to allow for more efficient cooling, which can also be better controlled with the Mesh Digital variant. It has an information panel with temperatures of key components. It is implemented using a simple display, so the price has not risen too much and is still attractive. There is higher airflow due to the more open shell and also the added positions for installing optional fans. Read more “Perforated front and a display, the new DeepCool case” »