MSI RTX 3060 Ti Gaming X Trio: mid-class with a high-end cooler

Methodology: how we measure power draw

You are probably already looking forward to the announced tests of the RX 6700 XT, but first let’s look at the results of the RTX 3060 Ti. We managed to add this graphics card to our database right before the new Radeon at the last minute and it is important for a full review of the RX 6700 XT. But now we’re going to see a sisterly duel of the RTX 3060 Ti and RTX 3070. These graphics cards are close in terms of performance and price.

Methodology: how we measure power draw

We have been tuning the method of measuring power draw for quite a long time and we will also be tuning it for some time. But we already have gimmicks that we can work with happily.

To get the exact value of the total power draw of the graphics card, it is necessary to map the internal power draw on the PCI Express slot and the external one on the additional power supply. For the analysis of the PCIe slot, it was necessary to construct an in-between card on which the power draw measurement takes place. Its basis is resistors calibrated to the exact value (0.1 Ω) and according to the amount of their voltage drop we can calculate the current. We then substitute it into the formula for the corresponding value of the output voltage ~ 12 V and ~ 3.3 V. The voltage drop is so low that it doesn’t make the VRM of the graphics card unstable and the output is still more than 12/3.3 V.

We measure power consumption on the card between the graphics card and the PCI Express slot. Rado Kopera took care of the design and implementation (thank you!)

We are also working on a similar device for external power supply. However, significantly higher currents are achieved there, longer cabling and more passages between connectors are necessary, which means that the voltage drop will have to be read on an even smaller resistance of 0.01 Ω, the current state (with 0.1 Ω) is unstable for now. Until we fine-tune it, we will use Prova 15 current clamp for cable measurements, which also measures with good accuracy, they just have a range of up to 30 A. But that is also enough for the OC version of the RTX 3090 Gaming X Trio. If a card is over the range, it is always possible to split the consumption measurement (first into one half and then into the other half of the 12 V conductors).

And why bother with such devices at all when Nvidia has a PCAT power draw analyzer? For complete control over the measurements. While our devices are transparent, the Nvidia’s tool uses the processor that can (but of course does not have to) affect the measurements. After testing the AMD graphics card on the Nvidia’s tool, we probably wouldn’t sleep well.

To read and record measurements, we use a properly calibrated multimeter UNI-T UT71E, which exports samples to XLS. From it we obtain the average value and by substituting into the formula with the exact value of the subcircuit output voltages we obtain the data for the graphs.

We will analyze the line graphs with the waveforms for each part of the power supply separately. Although the 3.3 V value is usually negligible, it needs to be monitored. It is difficult to say what exactly this subcircuit powers, but usually the consumption on it is constant and when it changes only with regard to whether a static or dynamic image is rendered. We measure consumption in two sort of demanding games (F1 2020 and Shadow of the Tomb Raider) and one less demanding one (CS:GO) with the highest graphic details preset and UHD resolution (3840 × 2560 px). Then in 3D rendering in Blender using the Cycles renderer on the famous Classroom scene. However, in addition to high-load tests, it’s important to know your web browser consumption (which, in our case, is accelerated Google Chrome), where we also spend a lot of time watching videos or browsing the web. The usual average load of this type is represented by the FishIE Tank (HTML5) website with 20 fish and the web video in our power draw tests is represented by a sample with the VP9 codec, data rate of 17.4 mb/s and 60 fps. In contrast, we also test offline video consumption, in VLC player on a 45 HEVC sample (45.7 mb/s, 50 fps). Finally, we also record the power consumption of the graphics card on the desktop of idle Windows 10 with one or two active UHD@60 Hz monitors.


  •  
  •  
  •  
Flattr this!

Nvidia DLSS (3.5) in Alan Wake II. When does the game run best?

Alan Wake II is the first game to support Nvidia DLSS 3.5 from the start. In addition to the technological aspect, there is also the high popularity among gamers. This gives us the basic reasons to take a close look at the performance under different settings. In diving in with the gaming performance, we will be interested not only in the visual side, but also the power consumption. Not just of the graphics card, but the CPU as well. Read more “Nvidia DLSS (3.5) in Alan Wake II. When does the game run best?” »

  •  
  •  
  •  

Minitest: Cheap PSUs vs. graphics cards coils whine

You’ve already read the extensive analysis of graphics card coil whine changes depending on the PSU used. One last thing is missing for it to be complete. And that is to add the behavior of cheap PSUs with lower quality components. Otherwise, one could still speculate that across classes the situation could be significantly different. Could it? This is what we will focus on in the measurements with “80 Plus” PSUs, one of which is also already quite old. Read more “Minitest: Cheap PSUs vs. graphics cards coils whine” »

  •  
  •  
  •  

The Ventus 3X (RTX 4070 TiS) case: Final vs. original VBIOS

The GeForce RTX 4070 Ti Super Ventus 3X graphics card came out with a BIOS that MSI (and even Nvidia) wasn’t happy with. After the second revision, there is the third, the last revision of the BIOS. This one increases the power limit to allow higher GPU clock speeds to be achieved. However, this comes at the cost of a bit lower power efficiency. To update or not to update? That’s for everyone to decide for themselves, if they get the chance. Read more “The Ventus 3X (RTX 4070 TiS) case: Final vs. original VBIOS” »

  •  
  •  
  •  

Leave a Reply

Your email address will not be published. Required fields are marked *