Results – 39; 42 and 45 dBA
What impact does adjusting the fan configuration have on the efficiency and acoustic profile of the Scythe Fuma 3 cooler? We report on the possible changes in the additional tests, where in one of the modes, the heatsink is supplemented with a third fan and in the other we replaced the low-profile fan with a thicker model, but at the same time we deprived the cooler of one of the advertised advantages – the counter-rotating fans.
Results – 39; 42 and 45 dBA
Why is there a missing value in the cooler chart? Either because the cooler could no longer handle the load in the specified mode, or because the fan could not be slowed down to the required level, typically the mode with the lowest noise level.
Continue: Results – 48 dBA and maximum speed
- Contents
- A small re-configuration of the Fuma 3
- Results – 39; 42 and 45 dBA
- Results – 48 dBA and maximum speed
- Spectral analysis of noise
Thank you for the review!
For dual tower cooler I prefer to use one in the front and one in the rear.
https://i.imgur.com/5Tmf133.png
For the rear fan better use a spacer for less noise.
https://youtu.be/ztOZesVGIVo