Arctic P12 Pro A-RGB: The Benchmark for Illuminated Fans

You already know the impressive features of the new aerodynamic design of Arctic’s 7-blade fans from our earlier tests. Now we add the results for the ARGB LED versions (P12 Pro A-RGB), which are naturally quite similar, but also show certain differences due to a more light-conductive material. That’s why it’s worth taking another look. The title of this review already hints at where things are heading.

Results: Frequency response of sound w/o obstacles

Measurements are conducted using TrueRTA, which captures audio data across 240 frequency bands within the 20–20,000 Hz range. To facilitate comparisons between articles, we extract and present the dominant frequency from each of three spectral bands: low (20–200 Hz), mid (201–2000 Hz), and high (2001–20,000 Hz) in standardized bar graphs.

However, for an even more detailed analysis of the sound expression, it is important to perceive the overall shape of the graph and the intensity of all frequencies/tones. If any aspects of the graphs or data tables are unclear, detailed interpretation guidelines are provided in this article.

Most fan-related acoustic activity occurs within the 70–7000 Hz range. Frequencies above 7000 Hz typically represent electromagnetic interference from the test environment, while the lowest bands below 70 Hz may also include such noise, albeit mixed with aerodynamic sound. Although we could exclude these frequency extremes, they are retained to detect and visualize potential anomalies.



Wordpress Table Plugin



Wordpress Table Plugin



Wordpress Table Plugin
Why is a value sometimes missing for a fan? There can be several reasons. Most commonly, it’s because the fan couldn’t be regulated to the target noise level. Some fans have higher minimum RPM (or they spin slowly but have an excessively noisy motor), or they are simply slower models that can’t reach higher decibel thresholds. Results are also omitted from graphs if the impeller scrapes against the mesh of a nylon filter. In such cases, we classify the combination as incompatible. And of course, a zero in the graphs naturally appears in situations where we record an actual 0.00. This often occurs at extremely low speeds when obstacles are present or during vibration measurements.


Contents

Arctic BioniX P14 A-RGB: Elegant daisy chaining is just the beginning

High cooling efficiency is the foundation, but with the BioniX P14 A-RGB fans, Arctic has also made efforts on other fronts. In addition to the clever daisy-chaining method (with the aim of reducing cabling to a minimum), this includes, for example, illumination as intense as possible. The light is guided not only through the entire impeller, but also through the surface of the frame, from the side. There are light guides in these areas as well. Read more “Arctic BioniX P14 A-RGB: Elegant daisy chaining is just the beginning” »

Contents

Arctic BioniX P12 A-RGB: Efficient, inexpensive, illuminated and…

And with very clever daisy‑chaining from one fan to the next. This is what can fill in the ellipsis in the headline. The aerodynamic efficiency remains top‑tier, built on a design that Arctic revised some time ago (with the P12 Pro fans), but which can still be considered “new.” The BioniX P12 A‑RGB fans certainly are (new), and in this in‑depth analysis we focus on how they work. Read more “Arctic BioniX P12 A-RGB: Efficient, inexpensive, illuminated and…” »

Contents

Need new PC fans? Win a three-pack of Arctic P14 Pro A-RGB fans

A fan giveaway is finally here—and there are three of them up for grabs (a three-pack), with exceptionally attractive key characteristics. These are also illuminated variants, which may appeal to some users. Those who are less fond of RGB LED lighting can simply leave it disconnected and keep the fans in the dark. Well, relatively speaking, given that you are competing for the bright (white) version of the Arctic P14 Pro A-RGB fans. Read more “Need new PC fans? Win a three-pack of Arctic P14 Pro A-RGB fans” »

Contents

Comments (6) Add comment

  1. Here we have some direct comparisons with the predecessor (filter, grille, radiator). I think the A‑RGB Pros are a good choice as system fans. For radiators, I don’t think so.

    1. While the static pressure is over the roof, the actual airflow compared to the other new RGB fan is comparable at best. On one hand, the airflow w/o obstacle and on hexagonal grid lags significantly behind the Momentum RGB, on the other hand, it beats it on plastic filter (due to high static pressure). The P12 Pro is slightly better with radiators, but not far from the Momentum RGB. However, the potential collision with the nylon dust filter prevents it from achieving such a rare award on this site.
      At least, that my view, why Ľubo gives it the “Smurt buy” award, where it clearly dominates…although he certainly considered also the “top-notch” award, but…. 😉

      1. –“… “Smurt buy” award, where it clearly dominates…
        I overdid it… 😀
        …but I was thinking among RGB fans …and taking static pressure into account 😉

    2. I did consider giving it the “Top-notch” award, but in my opinion, the Arctic P12 Pro A-RGB has shortcomings in other areas that hold it back. Sure, it’s excellent in terms of aerodynamics, but it’s still a fan with clear signs of manufacturing compromises. I believe awarding it a more prestigious title like “Top-notch” would be unfair — for example, to a fan like the FD Momentum 12 RGB.

Leave a Reply

Your email address will not be published. Required fields are marked *