perex
Noise level, operating characteristics—F1 24, 2560 × 1440 (Silent)
In the following charts are monitoring data from the card during the F1 24 benchmark at 2560 × 1440 resolution with Ultra settings. It is the Singapore track in wet conditions. Unlike other benchmarks, this is not multiple benchmark loops with the card cooling down slightly between runs while loading, but a continuous game load in a five-lap race that lasts over ten minutes. The measured values shown in the charts are taken from the final lap, when the card is already warmed up.
Performance in Silent mode is practically the same, so the card is no slower than in Performance mode even with lower noise.
The average GPU clock dropped only 14 MHz to 2769 MHz, with a minimum of 2752 MHz and a maximum of 2782 MHz.
Here too the power draw series from monitoring looks no different—it fluctuates and does not reach the BIOS-set power limit.
The average warmed-up chip temperature is at a maximum of 71.6 °C according to monitoring, with memory staying at 68 °C most of the time.
Fans stayed around 1850–1860 RPM.
And according to monitoring, GPU Boost is again limited by reliability voltage.
Noise level, operating characteristics—F1 24, 2560 × 1440 (Silent)
And for completeness, the same measurement in 4K resolution.
⠀



















